Comparative Study of Different Grid Connected Wind Energy Conversion System Configurations

Authors

  • Virendra Kumar Maurya Department of Electrical Engineering MUIT, Lucknow
  • Dr. J.P. Pandey Department of Electrical Engineering, MMMUT, Gorakhpur
  • Chitranjan Gaur Department of Electrical Engineering, SVNIT, Lucknow, India

DOI:

https://doi.org/10.54060/JIEEE/002.02.024

Keywords:

Wind Energy Conversion Unit, Fixed Speed Wind Energy Conversion Unit, Squirrel cage induction generator, Doubly Fed Induction Generator, Permanent Magnet Synchronous Generator, Maximum power point traction Technology

Abstract

As per the present scenario of the world energy crisis, Renewable energy conversion sys-tems (wind energy) have become the most prominent alternative in the field of renewa-ble energy, especially at offshore locations due to the availability of wind in huge amounts round the clock. This paper summarizes the comparative study of most com-monly used generators and power converters configurations at off-shore/on-shore wind farms. A comparison study has been done on the basis of their fixed/variable speed op-eration, MPPT ability, FRT ability, power converter utilization, power factor, reactive power compensation, with and without gearbox, and other technical parameters.

Downloads

Download data is not yet available.

References

A. Madariaga, J. L. Martin and I. Zamora, et al., “Technological trends in electric topologies for offshore wind power plants,”Renewable and Sustainable Energy Reviews, vol. 24, pp. 32-44, Aug 2013.

F. Blaabjerg, M. Liserre and K. Ma, "Power Electronics Converters for Wind Turbine Systems," in IEEE Transactions on Industry Applications, vol. 48, no. 2, pp. 708-719, April 2012.

B. Wu, Y. Lang, N. Zargari, et al., “Power Conversion and Control of Wind Energy Systems,” Wiley-IEEE Press eBook Chapters; 1st edition Hoboken, NJ, USA: Wiley-IEEE, IEEE Press Series on Power Engineering, pp.275 – 316,July 2011.

E. J. Bueno, S. CÓbreces, F. J. RodrÍguez, et al., "Design of a Back-to-Back NPC Converter Interface for Wind Turbines with Squirrel-Cage Induction Generator," in IEEE Transactions on Energy Conversion, vol. 23, no. 3, pp. 932-945, Sept. 2008.

F. Blaabjerg and Z. Chen, “Power Electronics for Modern Wind Turbines,”, Synthesis Lectures on Power Electronics, 2006.

D. J. Trudnowski, A. Gentile, J. M. Khan, et al., "Fixed-speed wind-generator and wind-park modeling for transient stability studies," in IEEE Transactions on Power Systems, vol. 19, no. 4, pp. 1911-1917, Nov 2004.

A. Koyanagi, H. Nakamura, M. Kobayashi, et al., "Study on maximum power point tracking of wind turbine generator using a flywheel," Proceedings of the Power Conversion Conference-Osaka (Cat. No.02TH8579), vol.1, pp. 322-327,2002.

A. Miller, E. Muljadi and D. S. Zinger, "A variable speed wind turbine power control," in IEEE Transactions on Energy Conversion, vol. 12, no. 2, pp. 181-186, June 1997.

E. Spooner and A. C. Williamson, “Direct coupled, permanent magnet generators for wind turbine applications,” IEE Proc. - Electr. Power Appl., vol. 143, no. 1, pp.1-8, 1996.

F. Blaabjerg, Z. Chen and S. B. Kjaer, "Power electronics as efficient interface in dispersed power generation systems," in IEEE Transactions on Power Electronics, vol. 19, no. 5, pp. 1184-1194, Sept 2004.

G. Johnson, “Wind Energy Systems,”Englewood Cliffs, “NJ: Prentice- Hall, pp.1-449,Year 1990.

H. J. Bahirat, B. A. Mork and H. K. Høidalen, "Comparison of wind farm topologies for offshore applications," IEEE Power and Energy Society General Meeting, pp. 1-8,2012.

H. Li and Z. Chen, “Overview of different wind generator systems and their comparisons,” IET Renew. Power Gener., vol. 2, no. 2, pp. 123–138, 2008.

H. Polinder, F. F. A. V. D. Pijl, G.J. de Vilder et al., "Comparison of direct-drive and geared generator concepts for wind turbines," in IEEE Transactions on Energy Conversion, vol. 21, no. 3, pp. 725-733, Sept 2006.

H. Polinder, S. W. H. D. Haan, M. R. Dubois, et al., “Basic operation principles and electrical conversion systems of wind turbines,” EPE j., vol. 15, no. 4, pp. 43–50, 2005.

R. Datta and V. T. Ranganathan, "A method of tracking the peak power points for a variable speed wind energy conversion system," in IEEE Transactions on Energy Conversion, vol. 18, no. 1, pp. 163-168, March 2003.

I. Dincer, “Renewable energy and sustainable development: a crucial review,” Renew. Sustain. Energy Rev., vol. 4, no. 2, pp. 157–175, 2000.

I. Munteanu, A. L. Bratcu, N. A. Cutululis, et al., “Optimal Control of Wind Energy Systems,” 1st Ed. Springer-Verlag, London, pp. 1-283, 2008.

J. Dixon, L. Moran, J. Rodriguez, et al., "Reactive Power Compensation Technologies: State-of-the-Art Review," in Proceedings of the IEEE, vol. 93, no. 12, pp. 2144-2164, Dec 2005.

J. G. Slootweg and E.de Vries, “Inside wind turbines—fixed vs. variable speed, “Renewable Energy World, vol. 6, no. 1, pp. 30–40, 2003.

J. Twidell, “Wind turbines: Technology fundamentals,” Renewable Energy World, vol. 6, no. 3, pp. 102–111, 2003.

I. Schiemenz and M. Stiebler, "Control of a permanent magnet synchronous generator used in a variable speed wind energy system," IEMDC.IEEE International Electric Machines and Drives Conference (Cat. No.01EX485), pp. 872-877, 2001,

J. Marques, H. Pinheiro, H. Grundling, et al.,” A Survey on Variable-Speed Wind Turbine System, “Brazilian Conference of Electronics of Power, vol. 1, pp. 732-738, 2003.

L. Helle and S. Munk-Nielsen, "Comparison of converter efficiency in large variable speed wind turbines," APEC. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181), vol.1, pp. 628-634, 2001.

L. L. Freris,” Wind Energy Conversion Systems, “Englewood Cliffs,NJ: Prentice-Hall, 1990.

W. Li and G. Joos, "Comparison of Energy Storage System Technologies and Configurations in a Wind Farm, "IEEE Power Electronics Specialists Conference, pp. 1280-1285, Oct 2007.

L. Xu and P. Cartwright, "Direct active and reactive power control of DFIG for wind energy generation," in IEEE Transactions on Energy Conversion, vol. 21, no. 3, pp. 750-758, Sept.2006.

M. Chinchilla, S. Arnaltes and J. C. Burgos, "Control of permanent-magnet generators applied to variable-speed wind-energy systems connected to the grid," in IEEE Transactions on Energy Conversion, vol. 21, no. 1, pp. 130-135, March 2006.

M. E. Haque, M. Negnevitsky and K. M. Muttaqi, "A Novel Control Strategy for a Variable Speed Wind Turbine with a Permanent Magnet Synchronous Generator, "IEEE Industry Applications Society Annual Meeting, pp.1-8, 2008.

M. J. Hossain, H. R. Pota, V. A. Ugrinovskii et al., "Simultaneous STATCOM and Pitch Angle Control for Improved LVRT Capability of Fixed-Speed Wind Turbines," in IEEE Transactions on Sustainable Energy, vol. 1, no. 3, pp. 142-151, Oct 2010.

M. A. Abdullah, A. H. M. Yatim, C. W. Tan, et al., “A review of maximum power point tracking algorithms for wind energy systems,” Renew. Sustain. Energy Rev., vol. 16, no. 5, pp. 3220–3227, 2012.

M. Mansour, M.N. Mansouri and M.F. Mmimouni, “Study and control of a variable-speed wind-energy system connected to the grid,” International Journal of Renewable Energy Research, vol. 1, no.2, pp. 96- 104, 2011.

M. Lu, C. Chang, W. Lee, et al., "Combining the Wind Power Generation System with Energy Storage Equipment," in IEEE Transactions on Industry Applications, vol. 45, no. 6, pp. 2109-2115, 2009.

M. R. Khadraoui and M. Elleuch, "Comparison between OptiSlip and Fixed Speed wind energy conversion systems," 5th International Multi-Conference on Systems, Signals and Devices, pp. 1-6, 2008.

M. R. J. Dubois,” Optimized permanent magnet generator topologies for direct-drive wind turbines,” Delft, The Netherlands,2004.

N. Mohan, T. M. Undeland and W. P. Robbins, “Power Electronics: Converters, Applications and Design,”3rd ed. New York: Wiley, pp.1-576, 2003

R. D. Richardson and W. L. Erdman, “Variable speed wind turbine,”U.S. Patent, 5 083 039,1992.

P. Singhal, P. Sharma, and B. Hazela, “End-to-end message authentication using CoAP over IoT,” in International Conference on Innovative Computing and Communications, Singapore: Springer Singapore, vol.55, pp. 279–288, 2019.

P. Singhal, P. Sharma, & S. Rizvi, “Thwarting Sybil Attack by CAM Method in WSN using Cooja Simulator Framework. International Journal of Engineering & Technology, vol.8 no.1.5, pp. 116-125, 2019.

P. Singhal, P. Sharma, & D. Arora, “An approach towards preventing iot based sybil attack based on contiki framework through cooja simulator,” International Journal of Engineering & Technology, vol.7, no.2.8, pp.261-267, 2018.

B., Khan, & P. Singh,” Selecting a meta-heuristic technique for smart micro-grid optimization problem: A comprehensive analysis” IEEE Access, vol.5, pp.13951-13977,2017.

T. Molla, B. Khan & P. Singh, “A comprehensive analysis of smart home energy management system optimization techniques. Journal of Autonomous Intelligence, vol.1, no.1, pp.15-21,2018.

P. Singhal, A. Vidyarthi, P. Singh, ”Interpretation and localization of Thorax diseases using DCNN in Chest X-Ray ”Journal of Informatics Electrical and Electronics Engineering, vol.1, no.1, pp.1-7, 2020.

Downloads

Published

2021-06-04

How to Cite

[1]
V. Kumar Maurya, J. Pandey, and C. Gaur, “Comparative Study of Different Grid Connected Wind Energy Conversion System Configurations”, J. Infor. Electr. Electron. Eng., vol. 2, no. 2, pp. 1–13, Jun. 2021.

CITATION COUNT